Products
Fiber transport, distribution and combining of RF signals. Designed and made in France.
Simplex Radio over Fiber
FTX-1
Quote on request
The FTX-1 is a compact simplex Radio over Fiber transmitter. It converts an RF signal to a 1310 nm optical signal over single-mode fiber: in high sensitivity (470 – 690 MHz filtered, +12 dB) for wireless mic antennas, or in low sensitivity (0.1 – 3 GHz unfiltered, 0 / −10 / −30 dB) to plug a transmitter up to 50 mW straight in. Selectable antenna DC feed, 9 – 24 V supply. Designed and manufactured in France.
FRX-1
Quote on request
The FRX-1 is a compact simplex Radio over Fiber receiver. It converts a 1310 nm optical signal back to RF, from 80 MHz to 2.4 GHz, with two output modes: +30 dB amplified to re-emit an IEM, or attenuated 0 / −10 / −30 dB to feed a mic receiver, a GPS or a spectrum analyzer. 9 – 24 V supply, including through DC-feed. Designed and manufactured in France.
Radio over Fiber — Reception
AFB-250
Quote on request
The AFB-250 is a Radio over Fiber transmitter box for two receiving antennas. It converts two UHF 470 – 698 MHz signals to optical, each on its own single-mode fiber, inside a single OpticalCon Duo APC cord. Protected 12 V DC feed per input, 10 dB attenuator per channel, 78 dB min. dynamic range, 9 – 36 V power on XLR4. Aluminium enclosure for field use, to be used with an AFR-200, ACH-642 or ACH-862 base.
AFR-250S
Quote on request
The AFR-250S is a compact dual-channel Radio over Fiber receiver, used with an AFB-250, 2 FTX-1. OLED display (RF levels, optical loss, attenuation, voltages), 0 – 31 dB attenuator per channel, 9 – 18 V supply or splitter DC feed, receiver. 83 × 60 × 31 mm, 250 g.
AFR-200
Quote on request
The AFR-200 is the 19" rack Radio over Fiber receiver paired with the AFB-250. It receives its two single-mode fibers and delivers two 50 Ω diversity BNC outputs, with an optical loss indicator per channel. 470 – 698 MHz band (with AFB-250), 110 – 220 V mains power.
ACH-642
Quote on request
The ACH-642 is a 4:2:2 diversity hybrid combiner in a 19" rack. It combines one pair of local antennas over coax, with 12 V DC feed, and up to two pairs of remote antennas over fiber through two AFB-250, into two BNC outputs. Four optical loss indicators, 110 – 220 V mains power.
ACH-862
Quote on request
The ACH-862 is a diversity hybrid combiner in a 19" rack: one pair of coax antennas and up to three pairs of fiber antennas through three AFB-250, into two BNC outputs. Each channel is controlled from the front panel or the web interface: ON/OFF, fiber channel attenuation, DC feed, RF and optical levels, presets.
Radio over Fiber — Transmission
AFB-350
Quote on request
The AFB-350 is a fiber transmit antenna box: it receives an ATH-200 signal over one single-mode fiber and drives a remote transmit antenna with its built-in amplifier, 500 mW on one carrier, from 100 to 1000 MHz. SWR indicator, XLR4 power.
ATH-200
Quote on request
The ATH-200 is a 1U hybrid transmission base for one or two transmitters, from 100 to 1000 MHz. Each input comes out locally on a BNC and is combined onto fiber toward one or two AFB-350. Gain adjustable per fiber output, from −24 to +7 dB.
RF Distribution
AS-84
Quote on request
The AS-84 is a compact active combiner / splitter: two antenna pairs in, selectable or summed, eight SMA outputs for four diversity receivers. Wideband or tunable narrowband filter, regulated 12 V DC feed per input, OLED display. 88 × 84 × 44 mm, 250 g.
AS-62
Quote on request
The AS-62 is a compact diversity active antenna splitter: two BNC inputs, three SMA outputs per antenna, for three diversity receivers. Filtered wideband 470 – 700 MHz, 39 dBm OIP3, two-step RF Peak, protected 12 V DC feed. 83 × 60 × 31 mm, 250 g.
AS-122
Quote on request
The AS-122 is a diversity active antenna splitter: two filtered BNC inputs, six SMA outputs per antenna, for six diversity receivers. 470 – 700 MHz band, 1.5 dB noise figure, regulated and protected 12 V DC feed, two-step RF Peak. 88 × 84 × 44 mm, 265 g.
Combiners
LAC-21
Quote on request
The LAC-21 is a linear active 2:1 RF combiner, from 100 to 800 MHz: two transmitters on one antenna, or two antennas into one receiver, without loss. +3 dB, 0 dB or User gain (+6 to −9 dB), 46 dBm OIP3, 100 mW output. Bag-sized, 12 – 18 V.
PC-2
Quote on request
The PC-2 is a passive 2:1 power combiner for UHF transmitters, from 400 to 900 MHz: two non-coherent signals up to 2 W per input into one antenna, 4.5 dB typical loss. Three 50 Ω BNC, no power supply, 200 g.
Accessories
FA-1
Quote on request
The FA-1 is an inline filtered amplifier, powered through the coax DC feed. 50 MHz cavity filter on four UHF blocks, BP / +6 / +9 / +12 dB gain, fail-safe: unpowered, it remains a passive filter. BNC, 94 × 20 × 24 mm, 100 g.
PM-1
Quote on request
The PM-1 is a 10 – 1000 MHz broadband RF power meter, from 0.1 mW to 2 W (−10 to +33 dBm), accurate to ±0.2 dB. Relative mode to measure a cable loss or an amplifier gain, ±20 dB compensation, threshold alarms. 9 V battery, aluminium housing, 200 g.
NS-1
Quote on request
The NS-1 is a 100 – 1500 MHz white noise generator, −75 dBm per 200 kHz, powered by the DC feed. In place of the antenna, it turns the receiver's scan into an analyzer of the RF path: cable loss, filtering, DC feed. 10 – 18 V, 57 × 25 × 18 mm, 20 g.
Cordon SMA-SMA90°
Quote on request
Low-loss, dual-shield coaxial cable, in 30 or 50 cm, individually tested from 100 MHz to 3 GHz. A coloured cap identifies your connections.
Cordon SMA90°-SMA90°
Quote on request
Low-loss, dual-shield coaxial cable, in 30 or 50 cm, individually tested from 100 MHz to 3 GHz. A coloured cap identifies your connections.