Radio over Fiber — Compact dual receiver
AFR-250S
Two antennas over fiber, in the palm of your hand.
The AFR-250S is a compact dual-channel Radio over Fiber receiver, used with an AFB-250, 2 FTX-1. OLED display (RF levels, optical loss, attenuation, voltages), 0 – 31 dB attenuator per channel, 9 – 18 V supply or splitter DC feed, receiver. 83 × 60 × 31 mm, 250 g.
Bandwidth
100 – 1000 MHz
Outputs
2 × BNC 50 Ω
Attenuator
0 – 31 dB · 1 dB step
Display
OLED 1.3"
Form factor
83 × 60 × 31 mm · 0.25 kg
Highlights
OLED display
The 1.3" screen shows per channel the RF level, optical loss and attenuation, plus the DC In and DC-feed voltages and the internal temperature.
RF · optical · voltages · attenuation
Per-channel attenuator
Set with the encoder, channel A or B, to adjust the noise / sensitivity trade-off in multi-antenna setups.
0 – 31 dB · 1 dB step
RF and optical alerts
RF: level too high at the AFB-250 input, move or filter the antenna. OP: optical loss above threshold, check and clean the fiber. Thresholds adjustable in the menu.
RF A/B · OP A/B LEDs
Two ways to power it
4-pin push-pull connector 9 – 18 V, or 12 V DC feed coming through the BNCs from a receiver, splitter or combiner (AS-62, AS-122).
DC In 9 – 18 V · or DC feed
Compact
Bag, sound cart or watertight case. For fixed installs, up to four units on a 19" bar (ask us). Aluminium enclosure.
83 × 60 × 31 mm · 0.25 kg
In detail
The AFR-250S is a dual optical / RF converter in a small form factor. Used with an AFB-250 or 2 FTX-1, it remotes two receiving antennas over single-mode optical fiber.
It fits in a bag, on a sound cart or in a watertight case. For fixed installs, up to four units mount on a 19" patch bar (ask us).
The 1.3" OLED screen shows, for each channel, the RF level, optical loss and attenuation value, plus the supply voltages and internal temperature. The RF A/B LEDs flag an RF level too high at the AFB-250 input; the OP A/B LEDs an optical loss above threshold. Thresholds and optical reference are set in the menu.
Each channel's attenuator, 0 to 31 dB in 1 dB steps, is set with the encoder to adjust the noise / sensitivity trade-off in multi-antenna setups.
Two ways to power it: the 4-pin push-pull connector (9 – 18 V), or the 12 V DC feed from a receiver, splitter or combiner connected to the BNC outputs, such as an AS-62 or AS-122. LC/APC Duo optical input. Aluminium enclosure.
Specifications
The numbers that matter.
Condensed excerpt. See the datasheet for detailed conditions.
RF
Fiber & interface
Power
Mechanical
Use cases
Bag / sound cart
Two fiber antennas on a portable receiver
AFB-250 at the antennas → LC/APC Duo fiber → AFR-250S on the cart, powered by the AS-62 or AS-122 splitter DC feed: no power brick.
Multi-antenna
Balance levels at the receiver
The per-channel attenuator trims each remote antenna without touching the install; the RF LED flags an antenna too close to a transmitter.
Fixed install
Several fiber links on a 19" bar
Up to four AFR-250S on a patch bar, each with its own display and attenuators (ask us).
Documentation
Everything you need before buying.
Datasheets and user manuals available in PDF format.