RF Distribution — Active 4:8 combiner / splitter
AS-84
Four antennas, eight outputs, in a sound bag.
The AS-84 is a compact active combiner / splitter: two antenna pairs in, selectable or summed, eight SMA outputs for four diversity receivers. Wideband or tunable narrowband filter, regulated 12 V DC feed per input, OLED display. 88 × 84 × 44 mm, 250 g.
Configuration
4 BNC in → 2 × 4 SMA out
WB filter
470 – 700 MHz
NB filter
50 – 70 MHz · 470 – 740 MHz
OIP3
32 dBm typ.
DC feed
12 V / 200 mA
Highlights
Two antenna pairs, selectable or summed
Four BNC inputs: on each A and B channel, pick antenna 1, antenna 2 or the sum of both. Extended zone when the antennas overlap, multi-zone otherwise.
Port 1 · port 2 · 1 + 2
Wideband or tunable narrowband filter
Wideband 470 – 700 MHz, or 50 to 70 MHz narrowband tunable from 470 to 740 MHz in 32 steps, to protect reception when walkies, wireless video and wireless focus crowd the spectrum.
WB 470 – 700 · NB 50 – 70 MHz
Regulated 12 V DC feed
Switchable on each input, current limited. The input's DC LED blinks on over-current or short circuit.
12 V · 200 mA · per input
OLED display
Filter and frequencies, −40 to 0 dBm RF bargraph per channel, DC feed and selected inputs. Peak LED thresholds set in the menu, encoder lock.
Filter · RF levels · DC · inputs
Bag-sized
Bag or cart. 4-position stainless clip supplied, 12 – 18 V power on 4-pin Hirose.
88 × 84 × 44 mm · 250 g
In detail
The AS-84 is a diversity active antenna combiner / splitter in a small form factor: four BNC inputs and eight SMA outputs, for four diversity receivers. It is built for the most demanding shoots, in a sound bag or on a cart.
On each channel, pick the antenna on port 1, on port 2 or the sum of both: extended zone when the antennas overlap, multi-zone when they cover different places.
Filtering is wideband (470 – 700 MHz) or narrowband (50 to 70 MHz), tunable from 470 to 740 MHz with the encoder, to protect reception when walkies, wireless video and wireless focus crowd the spectrum.
A regulated, current-limited 12 V DC feed is switchable on each input for active antennas; the input's DC LED blinks on over-current or short circuit. The Peak LEDs flag an RF level above the threshold, set in the menu.
The OLED screen shows the filter and its frequencies, each channel's RF level from −40 to 0 dBm, the DC feed configuration and the selected inputs. The encoder can be locked.
12 – 18 V power on a 4-pin Hirose connector. 4-position stainless clip supplied. Unused outputs must be terminated with a 50 Ω SMA load.
Specifications
The numbers that matter.
Condensed excerpt. See the datasheet for detailed conditions.
RF
Inputs / outputs
Power
Mechanical
Use cases
Sound bag
Four diversity receivers from two antennas
Antennas A and B on the BNCs, eight SMA to four diversity receivers, DC feed for active antennas. 50 Ω loads on unused outputs.
Multi-zone
Two sets, one splitter
One antenna pair per set on inputs 1 and 2. Switch from one set to the other with the encoder, or sum both to cover everything.
Dense RF
Protect reception on a crowded shoot
Narrowband filter centred on your frequencies, bargraph and Peak LEDs to spot a saturating input.
Documentation
Everything you need before buying.
Datasheets and user manuals available in PDF format.