Radio over Fiber — IP hybrid combiner, 2 coax + 6 fibers

ACH-862

Eight antennas, controlled from a browser.

The ACH-862 is a diversity hybrid combiner in a 19" rack: one pair of coax antennas and up to three pairs of fiber antennas through three AFB-250, into two BNC outputs. Each channel is controlled from the front panel or the web interface: ON/OFF, fiber channel attenuation, DC feed, RF and optical levels, presets.

ACH-862 1
ACH-862 2
ACH-862 3
ACH-862 4

Combining

2 coax + 6 fibers → 2 BNC

Coax band

470 – 850 MHz

Fiber band

470 – 690 MHz (AFB-250)

Control

Front panel + web interface

ON/OFF isolation

60 dB typ.

Up two 2 additional fiber ports

Highlights

Eight antennas, two outputs

One pair of local antennas over coax and up to three pairs of remote antennas over fiber (three AFB-250), combined into two diversity BNC outputs, A and B.

2 coax + 6 fibers

ON/OFF on all 8 channels

Each antenna is switched on or off from the front-panel switches or the web interface, with 60 dB typical isolation when off.

Front panel or web · 60 dB

Web interface

From a browser on the local network: RF and optical levels for each channel, ON/OFF, DC feed, attenuation, presets. One control window at a time, TLS-encrypted traffic.

Browser · TLS · 1 session

Attenuation per fiber channel

Each fiber channel has its own attenuation, adjustable from 0 to −20 dB in the web interface, an RF meter from −40 to −10 dB with a peak indicator, and an optical status bargraph.

0 to −20 dB

DC feed from the front panel or remotely

12 V / 200 mA on each coax input, short-circuit protected, switched on or off with the front-panel buttons or from the web interface, which reports short circuits.

12 V · 200 mA · protected

Presets

Save a complete channel configuration and recall it in one click. Two presets by default, as many as you need after that.

Save · recall

In detail

Specifications

The numbers that matter.

Condensed excerpt. See the datasheet for detailed conditions.

RF

Coax bandwidth470 – 850 MHz
Fiber bandwidth470 – 690 MHz
Coax inputs2 × BNC 50 Ω
RF outputs2 × BNC 50 Ω
Coax channel gain±1 dB typ.
Fiber channel gain0 dB typ.
ON/OFF isolation60 dB typ.
Fiber channel attenuation0 to −20 dB
Coax DC feed12 V / 200 mA

Control

Local controlFront-panel switches · LEDs
Web interfaceBrowser · RJ45 Ethernet · TLS
Web functionsON/OFF · attenuation · DC feed · RF / optical levels · presets

Fiber & power

Fiber inputs3 × OpticalCon Duo APC · 1310 nm (LC/APC option)
Power supply110 – 220 V AC ou 12V DC

Mechanical

Dimensions480 × 280 × 44 mm
Weight3.5 kg
CompatibilityAFB-250 · FTX-1
ManufacturingMade in France

Use cases

Large site

Cover the stage and three remote zones

One pair of coax antennas on stage, three AFB-250 in the remote zones: the ACH-862 combines the four pairs into the booth's diversity receivers.

Remote adjustment

Monitor and adjust without going to the rack

From a browser on the local network: levels of each antenna, switching off a disturbed antenna, attenuating a channel that is too strong.

Presets

Switch from one configuration to another

One preset per antenna setup (rehearsal, show, closed zone…): one click to switch, without forgetting a channel.

Documentation

Everything you need before buying.

Datasheets and user manuals available in PDF format.

Ready to control your antennas from a browser?

Available by quote.