RF Distribution — Passive 2:1 power combiner

PC-2

Two transmitters, one antenna, up to 2 W.

The PC-2 is a passive 2:1 power combiner for UHF transmitters, from 400 to 900 MHz: two non-coherent signals up to 2 W per input into one antenna, 4.5 dB typical loss. Three 50 Ω BNC, no power supply, 200 g.

PC-2 1
PC-2 2
PC-2 3
PC-2 4

Configuration

2 → 1 · passive

Bandwidth

400 – 900 MHz

Loss

4.5 dB typ.

Power

2 W per input

Weight

200 g

Highlights

Two transmitters on one antenna, no power needed

Sums two non-coherent UHF signals from 400 to 900 MHz onto a single output. Fully passive: no power supply, nothing to set.

Passive 2:1 combiner

2 W per input

Takes transmitters up to 2 W per input. 4.5 dB typical insertion loss: count it in the power budget.

4.5 dB typ. loss

Three 50 Ω BNC

RF 1 and RF 2 on the front, RF 3 on the back. Unused ports are terminated with a 50 Ω load. Compact housing, 200 g.

RF 1 · RF 2 · RF 3

In detail

The PC-2 combines two non-coherent UHF signals, from transmitters up to 2 W, into a single antenna. It is fully passive: no power supply, no setting.

400 – 900 MHz band, 4.5 dB typical insertion loss, 50 Ω impedance. Three BNC: RF 1 and RF 2 on the front, RF 3 on the back.

All unused ports must be terminated with a 50 Ω load. Make all connections before switching the transmitters on.

Specifications

The numbers that matter.

Condensed excerpt. See the datasheet for detailed conditions.

RF

TypePassive 2:1 power combiner, non-coherent signals
Bandwidth400 – 900 MHz
Loss4.5 dB typ.
Rated input power2 W (non-coherent)
Impedance50 Ω

Inputs / outputs

Connectors3 × BNC 50 Ω (RF 1, RF 2 front · RF 3 rear)
Unused portsTerminate with a 50 Ω load

Mechanical

Power supplyNone (passive)
Dimensions83 × 60 × 31 mm
Weight200 g
ManufacturingMade in France

Use cases

Transmission

Two IEM transmitters on one antenna

Both transmitters on two ports, the antenna on the third. Make all connections before switching the transmitters on.

Power

Up to 2 W per input

The PC-2 takes transmitters up to 2 W per input, with no power supply; allow 4.5 dB of loss in the power budget.

Need to combine two transmitters?

Available by quote.