RF Distribution — Active 2:1 combiner
LAC-21
Two signals, one antenna.
The LAC-21 is a linear active 2:1 RF combiner, from 100 to 800 MHz: two transmitters on one antenna, or two antennas into one receiver, without loss. +3 dB, 0 dB or User gain (+6 to −9 dB), 46 dBm OIP3, 100 mW output. Bag-sized, 12 – 18 V.
Configuration
2 BNC in → 1 BNC out
Bandwidth
100 – 800 MHz
Gain
+3 · 0 · User dB
OIP3
46 dBm typ.
Form factor
83 × 60 × 31 mm · 250 g
Highlights
Two transmitters, one antenna
Sums two RF signals onto one output without loss, from 100 to 800 MHz: two transmitters on one antenna, or two receiving antennas into one input.
Active 2:1 combiner
Linear amplifiers
High-linearity amplifiers to limit intermodulation products between the two transmitters. Output up to 100 mW (20 dBm).
46 dBm OIP3
Selectable gain
Three-position switch: +3 dB, 0 dB, or User, set with solder jumpers on the board from +6 dB (default) to −9 dB in 1 dB steps.
+3 dB · 0 dB · User
Bag-sized
Machined / extruded aluminium housing, 4-pin push-pull power connector, 12 – 18 V.
83 × 60 × 31 mm · 250 g
In detail
The LAC-21 is a compact active RF combiner, from 100 to 800 MHz. It sums two VHF-UHF transmitters to share one antenna, without loss, or two receiving antennas into a single input. It can also add a few dB of gain when more range is needed.
Its high-linearity amplifiers limit intermodulation products: 46 dBm typical OIP3, output up to 100 mW (20 dBm).
A three-position switch selects the gain: +3 dB, 0 dB, or User, set with solder jumpers on the board from +6 dB (default) to −9 dB in 1 dB steps. The maximum input power depends on the gain: 10 mW at +6 dB, 50 mW at +3 dB, 100 mW at 0 dB.
12 – 18 V power on a 4-pin push-pull connector, 300 mA typical. Machined / extruded aluminium housing, 83 × 60 × 31 mm, 250 g.
Specifications
The numbers that matter.
Condensed excerpt. See the datasheet for detailed conditions.
RF
Inputs / outputs
Power
Mechanical
Use cases
Transmission
Two IEM transmitters on one antenna
Both transmitters on BNC A and B, the transmit antenna on the output. Respect the max input power for the selected gain.
Reception
Two antennas into one receiver
Two receiving antennas summed into a single input, to cover two zones with one receiver.
Range
Gain a few dB
In the +3 dB or User position up to +6 dB, the LAC-21 compensates a cable loss or extends the range, within the 100 mW output limit.
Documentation
Everything you need before buying.
Datasheets and user manuals available in PDF format.