Radio over Fiber — Rack dual-antenna receiver
AFR-200
Two fiber antennas, back at the booth.
The AFR-200 is the 19" rack Radio over Fiber receiver paired with the AFB-250. It receives its two single-mode fibers and delivers two 50 Ω diversity BNC outputs, with an optical loss indicator per channel. 470 – 698 MHz band (with AFB-250), 110 – 220 V mains power.
Band with AFB-250
470 – 690 MHz
RF outputs
2 × BNC 50 Ω
Fiber input
OpticalCon Duo APC · 1310 nm
Format
19" rack · 3.1 kg
Highlights
The AFB-250's base
Receives the two fibers from an AFB-250 and delivers two 50 Ω diversity BNC outputs, A and B, to feed your receivers or a splitter.
2 fibers → 2 BNC
Optical loss indicator
One Optical In LED per channel: green when the optical signal is good, blinking between 3 and 6 dB of loss, off beyond. A dirty fiber shows up without any instrument.
Blinks 3 – 6 dB · off > 6 dB
19" rack on mains
19" rack chassis powered straight from 110 – 220 V mains through an IEC inlet, Neutrik OpticalCon Duo APC or 2 × LC/APC optical input.
110 – 220 V AC · 480 × 280 × 44 mm
In detail
The AFR-200 is a diversity fiber receiver (two fibers). It remotes two receiving antennas over two single-mode optical fibers, together with an AFB-250 (or 2 FTX-1) placed at the antenna foot.
It converts the optical signal back into two 50 Ω BNC RF outputs, A and B, to connect to diversity receivers or a splitter. The receiver covers 150 – 1000 MHz; with an AFB-250, the band is 470 – 690 MHz.
Front-panel LEDs show whether an AFB-250 is connected. For each channel, the Optical In LED reports optical signal loss: green when the signal is good, blinking between 3 and 6 dB of loss (a dirty fiber, for example), off beyond 6 dB.
The optical input is a comptatible OpticalCon Duo APC connector, 1310 nm; connection through two LC/APC is also possible. The AFR-200 mounts in a 19" rack and runs on 110 – 220 V mains.
Specifications
The numbers that matter.
Condensed excerpt. See the datasheet for detailed conditions.
RF
Fiber & power
Mechanical
Use cases
Live / broadcast
Bring two remote antennas back to the booth
AFB-250 at the antenna foot → OpticalCon Duo cord → AFR-200 at the booth → diversity receivers. BSRF's basic radio-over-fiber chain.
Fixed installation
Rooftop antennas to a tech rack
AFB-250 up high, single-mode fiber down to the rack, AFR-200 in a 19" rack. With a 5 dB optical budget, up to 10 km between the two.
Simplex
Receive an FTX-1
The FTX-1 in high sensitivity (470 – 690 MHz filtered, +12 dB) is compatible with the AFR-200: one isolated antenna, one fiber, one AFR-200 channel.
Documentation
Everything you need before buying.
Datasheets and user manuals available in PDF format.