• Products
  • Radio over Fiber
  • Buy
  • About
FRContact
  1. BSRF
  2. Applications
  3. IEM Re-Emitter over Fiber

IEM Re-Emitter over Fiber

An IEM or pocket transmitter, 17 dBm typical, feeds the FTX-1 directly. The FRX-1 drives a remote transmit antenna. Settings: FTX-1 at −30 dB, FRX-1 with +30 dB amplifier.

Products used in this configuration

  • FTX-1
    FTX-1

    The FTX-1 is a compact simplex Radio over Fiber transmitter. It converts an RF signal to a 1310 nm optical signal over single-mode fiber: in high sensitivity (470 – 690 MHz filtered, +12 dB) for wireless mic antennas, or in low sensitivity (0.1 – 3 GHz unfiltered, 0 / −10 / −30 dB) to plug a transmitter up to 50 mW straight in. Selectable antenna DC feed, 9 – 24 V supply. Designed and manufactured in France.

  • FRX-1
    FRX-1

    The FRX-1 is a compact simplex Radio over Fiber receiver. It converts a 1310 nm optical signal back to RF, from 80 MHz to 2.4 GHz, with two output modes: +30 dB amplified to re-emit an IEM, or attenuated 0 / −10 / −30 dB to feed a mic receiver, a GPS or a spectrum analyzer. 9 – 24 V supply, including through DC-feed. Designed and manufactured in France.

A project, a question?

We help you size your installation.

Write to us

BSRF SAS

114, rue Nicolas Copernic

33127 Saint-Jean d'Illac

FRANCE

contact@bs-rf.com

BSRF

  • Products
  • Wizard
  • Buy
  • Support
  • About

Radio over Fiber

  • Radio over Fiber
  • Optical Fiber

Legal

  • Terms and conditions of sale
  • Legal notice
  • Privacy policy

© 2017 — 2026 BSRF · Made in France