BSRFApplicationsWireless Video with LNB over FiberWireless Video with LNB over FiberThe LNB downconverter, powered by the FTX-1 DC feed, brings the video signal down to coax. The FRX-1 delivers it to the receiver. Settings: FTX-1 at 0 dB with DC feed on, FRX-1 with +30 dB amplifier.Products used in this configurationFTX-1The FTX-1 is a compact simplex Radio over Fiber transmitter. It converts an RF signal to a 1310 nm optical signal over single-mode fiber: in high sensitivity (470 – 690 MHz filtered, +12 dB) for wireless mic antennas, or in low sensitivity (0.1 – 3 GHz unfiltered, 0 / −10 / −30 dB) to plug a transmitter up to 50 mW straight in. Selectable antenna DC feed, 9 – 24 V supply. Designed and manufactured in France.FRX-1The FRX-1 is a compact simplex Radio over Fiber receiver. It converts a 1310 nm optical signal back to RF, from 80 MHz to 2.4 GHz, with two output modes: +30 dB amplified to re-emit an IEM, or attenuated 0 / −10 / −30 dB to feed a mic receiver, a GPS or a spectrum analyzer. 9 – 24 V supply, including through DC-feed. Designed and manufactured in France.